- Characteristics
- Specifications
Category | ADC-500 | |
---|---|---|
Basic Information | Method | Automatic loading and unloading dry milling |
Compatible Materials | Zirconium, PEEK, PMMA, Wax, Composite materials, and soft metals. Size:98.5mm | |
Restorations Supported | Crowns, Copings, Veneers, Inlays/Onlays Bridges, Full dentures, and All-on-X. | |
Body Structure | Solid cast aluminum. | |
Case | Steel plate, medical white high-gloss paint, working hatch, accessories drawer | |
Axis | 5 axis | |
Linear axis X/Y/Z | Precision ball screw, precision guide rail,repeat accuracy ±5μm precision motor travel, X/Y/Z: 176/134/100mm | |
Axis of rotation | Equipped with a precision motor and precision harmonic reducer, with a repeatability of ±0.01° Travel Range: A axis: ±32° B axis: ±360° |
|
Control system | Equipped with an 8-inch display,the 5-axis linkage controller features continuous path trajectoryand dynamic acceleration/deceleration planning capabilities.It integrates an FPGA for high-speed parallel instruction processing and operateson a realtime operating system that supports standard G-code(RS274) and extended command.The controllerincludes integrated inverters for synchronous and asynchronous motors, offering greater flexibility and enhanced compatibility.It supports multiple analog and digital lO channels and provides external USB port and RJ45 Ethernet interfaces. | |
LED Indicator | Equipped with a high-brightness RGB LED light, providing illumination while also being capable of displaying various status indicators. Ready & Milling (White) / Finshed milling(Green) / Error(Red) |
|
Spindle | Regular | High-frequency asynchronous spindle, tool change with air (do not rotate during tool changing), air seal to prevent foreign matter from entering. |
Rotate speed | 3000-60,000 rpm | |
Power | 900W(5S,Pmax); 400W(S6); 250W(S1) | |
Bearing | High speed ceramic ball bearings, Eccentricity<3um | |
Chuck | Suitable for Shank diameter 4mm, 50mm length milling burs | |
Automatic device | Tool library | 12 tools capacity, Integrated tool gauge |
Material storage tray | Hold up to 10 trays, maximum tray thickness is 35mm, tray outer diameter is 98.5mm | |
Milling mode | Dry milling | The spindle ejects high-pressure gas for cleaning and cooling during milling |
Automatic disk changer | The machine automatically loads and unloads materials, enabling 24-hours uninterrupted milling. | |
Conditions | Compressed air | 4-8bar(0.4-0.8Mpa), Air purity in accordance with:ISO 8573-1:2010, need to be equipped with a cold dryer |
Power supply | 100-120VAC, 200-240VAC, two types switchable, 50-60Hz | |
Data interface | RJ45 Ethernet interface, 10/100M selfadaptive, required for networking. | |
Temperature | 10-45℃ | |
Humidity | 80% relative humidity, non-condensing | |
Certification | CE&FCC | |
Size & Weight | Product Size | L*W*H 725mm*835mm*610mm |
Product Weight | 120kg | |
Package size | L*W*H 835mm*925mm*855mm | |
Package Weight | 160kg | |
Accessories | CAM | Support Millbox |
- Product video